by Why is there hair on the butt?
Hair grows almost all over the body, and the butt is no exception. It’s just that in some areas, like the head or pubic area, it can be dark and thick, while in other places, like the forearms or stomach, it can resemble light fluff.
Scientists believe that hair on the body, including the buttock area, performs important functions:
Helps retain heat or prevent cooling by maintaining a stable skin temperature. This is especially important in cold climates. Protects the skin from friction, irritation and possible damage when in contact with clothing or other surfaces. Helps to sense the slightest touch or changes in the environment due to the connection of hair with nerve endings. This improves perception and reaction to external stimuli. Promotes sweat evaporation and reduces humidity levels, which reduces the risk of irritation and infection.
Should I shave my butt?
Hair can grow on the buttocks, between them and even around the anus, and this can bother someone. And whether to remove the vegetation or not is up to you. Dermatologists do not give any prohibitions on this matter.
How to remove hair from your butt
There are different ways to remove hair from the buttocks and the area between them, but each of them has its own characteristics.
Shaving
Shaving is the fastest and most affordable way to remove hair. It is suitable for any area, including delicate areas like the butt. However, the results are short-lived and irritation or ingrown hairs may occur.
To shave safely, you will need a razor with a sharp and clean blade, shaving gel or cream suitable for sensitive skin, a trimmer (if the hair is too long), a mirror, warm water and a soft towel.
Then follow the instructions:
Take a shower. Wash your butt with mild soap and warm water to remove sweat, dirt, and oil. Warm water will help soften the hair and open the pores, making shaving easier. Trim long hairs if necessary. If the hair is long, use a trimmer or scissors to cut it to 2-3 mm. This will reduce the chance of clogging the razor. Apply shaving gel or cream. Spread a layer of gel or cream evenly over the area you are going to shave. This will reduce friction and protect the skin from irritation. Find a comfortable position. Stand in front of a mirror or sit on the edge of a chair to get a good view. If you are using a hand mirror, hold it with one hand to control the process. Begin shaving. Pull the skin taut with your free hand to create a smooth surface. Move the razor in the direction of hair growth to minimize irritation. After each stroke, rinse the razor blade under running water to remove cut hair. Rinse the skin. Rinse off any shaving gel or cream thoroughly with warm water. Make sure there are no hairs or foam left on the skin. Pat the skin dry. Use a soft cloth to gently dry the area. Avoid rubbing to avoid irritation. Apply moisturizer. Apply a non-greasy cream or aloe vera gel to soothe the skin and prevent irritation.
Waxing removes hair from the root, providing smoothness for several weeks. However, this method is painful and requires skill, so it is better not to do it yourself, but to go to a salon.
If you do decide to do it yourself, you’ll need wax for hair removal, lint-free cloth strips, scissors for cutting hair, pain reliever (optional), cold compresses to soothe the skin, a moisturizer labeled “oil-free” or “non-comedogenic,” a towel for drying the skin, and a mirror.
Here’s how to proceed:
Prepare your hair. Make sure it is approximately 1/4 to 1/2 inch (0.5 to 2 cm) long. If your hair is longer, trim it gently with safety scissors to make the procedure less painful and to ensure you get results you are happy with. Prepare your skin. Gently wash the area with warm water and mild soap to remove dirt and excess oil. Dry your skin completely with a soft towel. Dry skin will allow the wax to adhere better. Reduce discomfort. Take an over-the-counter pain reliever (such as ibuprofen) or apply a cold compress to the area to be waxed 30 minutes before your procedure to reduce sensitivity. Warm the wax according to the package directions. Test the temperature by applying a small amount to your wrist. The wax should be warm, but not hot. Apply the wax. Spread a thin layer over a small area of skin, following the direction of hair growth. Make sure the layer is even to avoid missing hair. You can use a mirror to control the process. Apply a strip of fabric. Place the fabric on the applied wax and press firmly. Leave the strip for 2-3 seconds so that it sticks well. Remove the strip. Stretch the skin with one hand and quickly pull the strip in the opposite direction of hair growth with the other. Soothe the skin. Apply cold compresses to relieve irritation and apply moisturizer.
Avoid hot water, tight clothing and rubbing the treated area for 24 hours. After the procedure, the skin may become red or irritated. Therefore, it is important to use the wax carefully, avoiding overheating it, so as not to burn the skin further.
Depilatories
Chemical depilatories, which come in cream or gel form, dissolve the hair, providing smoothness for several days.
For the procedure you will need the product itself, a spatula or a trowel, which are usually included in the kit, soap, a towel, a timer, warm water, and a moisturizer.
Before use, apply a small amount of cream to the skin area to check for an allergic reaction. Wait 24 hours. If there is no irritation, you can proceed with hair removal.
Prepare the area. Wash your skin thoroughly with warm water and mild soap to remove dirt. Pat dry with a towel. Apply cream. Apply the depilatory cream to the hairy area using a spatula or a spatula. Cover the hair evenly, avoiding excessive pressure. Make sure the cream does not come into contact with mucous membranes or damaged areas of the skin. Wait. Set the timer for the time specified in the instructions. Do not keep the product on longer to avoid burns or irritation. Check the result. Remove a small amount of cream from the skin with a spatula. If the hair comes off easily, proceed to the next step. If not, leave the cream on for another 1-2 minutes, but do not exceed the maximum time allowed. Remove the cream. Remove it along with the hair with a spatula or a damp cloth. Do this with gentle movements to avoid skin irritation. Rinse off the remains. Rinse the area thoroughly with warm water to remove all traces of the cream. Do not use soap or a washcloth. Pat the skin dry. Gently pat the treated area dry with a soft towel. Do not rub the skin. Moisturize. Apply a moisturizer to soothe the skin and prevent dryness. Look for products labeled “oil-free” or “non-comedogenic.”
Depilatories do not damage the skin, but some people may not like their smell.
Laser hair removal
During the procedure, the laser destroys the hair follicles. As a result, the hair disappears, and new hair begins to grow more slowly and becomes thinner.
This method is suitable for dark hair, but is not effective for light or gray hair.
To prepare for the procedure, avoid waxing and plucking 4-6 weeks in advance. These methods remove the hair roots that are needed for the laser to be effective. Shaving is allowed because it leaves the hair follicles intact.
Shave your hair the day before your session. This will make it easier for the laser to locate the follicles and prevent stubble burns, which can increase discomfort during the procedure.
The specialist may apply an anesthetic cream to the butt area 20-30 minutes before the procedure to reduce pain. You will be given special glasses to protect your eyes from the laser radiation.
You will then need to lie on your stomach. During the procedure, the laser emits pulses of light that target the hair follicles. This feels like warm pricks or soft clicks from a rubber band.
The first procedure may be a little more sensitive than subsequent ones.
Electrolysis
Electrolysis is a permanent hair removal method in which a trained electrologist inserts a thin wire into the hair follicle under the skin. Don’t be alarmed – the procedure is performed using very thin instruments. A mild electrical impulse is then sent through the wire, which destroys the hair root, preventing further growth. Although a slight warmth or tingling sensation may be felt, modern equipment and an experienced technician make the process as comfortable as possible.
This is how an electrolysis session goes:
The patient is positioned in a comfortable position. The electrologist cleans the area to be treated with an antiseptic to prevent infection. The specialist uses a special thin needle, which is inserted into the opening of the hair follicle. The needle is so thin that its size can be smaller than the thickness of the hair. A small electric current is supplied through the needle, which destroys the hair growth cells. The patient may feel warmth or a slight pinch at the site of needle insertion. The hair is removed with tweezers – if the root is successfully destroyed, the hair easily comes out of the follicle and no longer grows in this place. However, several sessions may be required to completely remove the vegetation in the treatment area.
Each hair is treated separately, which makes the process labor-intensive, especially on large areas of the body. For example, complete treatment of the buttocks area may take from 4 to 6 hours, depending on the thickness of the hair and the experience of the specialist.
